Question 1

How much does timber floor sanding and polishing cost?

Accepted Answer

The cost depends on the size and condition of the floor, the timber species, the amount of hand sanding required and the finish selected.As a general guide, full sanding and coating of hardwood timber floors typically ranges from around $77–$90 per m², with bamboo and more complex floors costing more. Additional work such as full filling, repairs, board replacement or detailed hand sanding may also affect the price.We can provide an estimate from photos and measurements, or arrange a site inspection where required.

Question 2

Can damaged timber floors be repaired without replacing the whole floor?

Accepted Answer

Yes, in many cases damaged timber floors can be repaired without replacing the entire floor.We can replace individual boards, repair loose or damaged sections, restore worn areas and blend repairs into the surrounding floor. The best approach depends on the timber species, age, condition and availability of matching material.We will always assess whether repair is practical before recommending full replacement.

Question 3

Can you repair water-damaged timber flooring?

Accepted Answer

Yes. We regularly assess and repair timber floors affected by water damage.The repair method depends on the extent of the damage and whether the timber has cupped, stained, lifted or deteriorated. In some cases the floor can be dried, repaired and refinished. More severe damage may require sections of timber to be replaced.We normally recommend allowing the affected area to dry properly before final repairs are completed.

Question 4

Can you match new timber to an existing floor?

Accepted Answer

In many cases, yes.We can identify the likely timber species, board dimensions and installation method, then source the closest available match. However, existing timber changes colour with age, sunlight and previous coatings, so a new repair may initially appear different.Where possible, sanding and refinishing the surrounding floor can help achieve a more consistent result.

Question 5

How long does floor sanding and coating take?

Accepted Answer

The timeframe depends on the size of the floor, its condition and the coating system being used.Most residential sanding and coating projects take approximately 3–5 days. Smaller areas may be completed sooner, while larger homes, repairs, parquetry or heritage floors may take longer.We will provide an expected timeframe before work begins.

Question 6

How soon can I walk on the floor after sanding and coating?

Accepted Answer

This depends on the coating system used.Light foot traffic is generally possible once the coating has sufficiently dried, but the floor will continue curing for several days. Furniture, rugs and heavy traffic should not be returned too early, as this can damage the new finish.We will provide specific instructions for your floor and coating system when the job is completed.

Question 7

Do I need to move my furniture before you start?

Accepted Answer

Yes, the flooring area generally needs to be completely clear before sanding, coating or installation begins.Furniture, rugs and personal items should be removed from the work area unless furniture removal has been included in your quotation.If you need assistance with preparation, speak with us before the scheduled start date.

Question 8

Can you sand and restore old or heritage timber floors?

Accepted Answer

Yes. Heritage timber flooring is one of our specialist areas.We have extensive experience restoring older timber floors, parquetry and heritage flooring where careful sanding, repairs and sympathetic restoration techniques are required.Our focus is on retaining as much original material as practical while restoring the floor to a durable and attractive condition.

Question 9

Can scratches, dents and stains be removed from timber floors?

Accepted Answer

Many scratches, dents and stains can be significantly reduced or removed during professional sanding and refinishing.The final result depends on how deeply the damage has penetrated the timber. Surface scratches and worn coatings generally respond very well, while deep stains, blackening or severe damage may require board replacement or additional restoration work.We can assess this during inspection.

Question 10

Do you supply and install timber flooring?

Accepted Answer

Yes. We can assist with both timber supply and professional installation.We work with solid hardwood, engineered timber, parquetry, bamboo and floating timber flooring.We can also help you select a suitable timber species, board style and finish based on the property, budget and appearance you want to achieve.

Question 11

Can timber flooring be installed over concrete?

Accepted Answer

Yes, timber flooring can often be installed over concrete, provided the slab is suitable and properly prepared.The concrete must be assessed for moisture, level and overall condition. Depending on the flooring system, preparation may include moisture protection, grinding, levelling, adhesives or an appropriate underlay.Correct preparation is important to the long-term performance of the floor.

Question 12

How do I know whether my floor needs sanding, recoating or replacing?

Accepted Answer

This depends on the condition of the timber and the existing coating.If the timber itself is sound but the coating is scratched or worn, a maintenance recoat may be sufficient. Floors with deeper scratches, discolouration or widespread wear may require full sanding and refinishing.Replacement is normally only recommended where the timber is badly damaged, unstable or no longer economically repairable.We can inspect the floor and recommend the most practical option.

Question 13

What finish is best for timber floors?

Accepted Answer

There is no single finish that is best for every floor.We generally recommend high-quality water-based coating systems because they provide excellent durability, lower odour, faster drying times and a natural appearance.Matte, satin and semi-gloss finishes are available, and we can recommend the most suitable option based on the timber species, amount of traffic and appearance you prefer.

Question 14

How often should timber floors be sanded or recoated?

Accepted Answer

There is no fixed timeframe, as it depends on traffic, maintenance, pets, footwear and the type of coating.A well-maintained timber floor may only need a light maintenance recoat after several years, while full sanding should generally only be carried out when the coating is heavily worn or the timber requires restoration.Regular maintenance can significantly extend the time between full sanding.

Question 15

What areas do you service?

Accepted Answer

Country & Heritage Timber Floors services Canberra and surrounding areas.We undertake residential, commercial, government and heritage flooring projects and can also consider work outside the Canberra region depending on the size and nature of the project.Contact us with your location and project details and we can confirm availability.

Some of our floors

Need help with your project

I need a Sanding Quote?

I need a Flooring Installation Quote?

Expert Advice and Quotes

Frequently asked questions